Air purifier with 400 CADR, 130 m³ coverage area, LED display and Wi-Fi control. Great CADR (Clean Air Delivery Rate), capable of filtering and cleaning 360 m³/h of the room’s air. Its 3 filtering processes through the pre-filter, active carbon filter and high-efficiency filter minimise the amount of toxic or harmful particles present in air. Its Wi-Fi control through Smartphone allows setting different configurations of the purifier and checking the measured data. Its large coverage area of 130 m³ turns this purifier into the perfect tool to eliminate harmful particles contained in air and to clean your rooms’ air. The purifier features a 2.5 PM sensor and a concentration sensor of polluting particles which are harmful to people, especially those that come from industrial emissions. Using the information obtained through this sensor, the purifier shows the air quality in a 4-colour scale, with blue being the higher quality and red the lower one. Its LED display shows many data in real time, which allows observing how the concentration of harmful particles in the air you breathe decreases. The touch control panel located on its upper part allows setting manually different operating functions. The 4 speed settings of this purifier (Eco, Low, Medium and High) allow adapting it according to each situation’s requirements. The purifier counts on a 8-hour times, and can be set for 1, 4, 8 hours or scheduled to automatically turn off. The Sleep mode allows purifying air while speed and dB are reduced to minimum, therefore it can be run during rest times. The Auto mode adapts the purifier’s air according to the quality of air at each specific moment, and therefore according to the need to purify air. It has a built-in thermometer in order to measure temperature in real time, which is shown on the display. It also has a hygrometer, in order to show environmental humidity on the display. When the filter is already full of the previously filtered harmful particles