Färgnamn

White

Produkttyp

Målning

Produktform

Färdigblandad

Lämplig för utomhusbruk

Ja

Lämplig för inomhusbruk

Ja

Bästa användningsområden

Universal

Lämplig placering

Universal

Färger

Vit

Färgsortiment

Vit

Yttäckning

12 m²/L

Yttäckning (min)

9,5 m²/L

Yttäckning (max)

12 m²/L

Yta

Matt

Färgvolym

15 l

Andel lättflyktiga organiska föreningar (VOC)

30 g/liter

Utsläppsklass för flyktiga organiska föreningar

A

Appliceringstemperatur (min.)

5 ° C

Appliceringstemperatur (max.)

35 ° C

Torktid

0,3 h

Påstrykningsbar efter

3 h

Snabbtorkande

Ja

Tvättbar

Ja

Stänkfri

Ja

Dispensertyp

Burk

Lätt att applicera

Ja

Användarvänlig

Ja

Vattentät

Ja

Easy to clean after drying

Ja

Bruksanvisning

Previous preparation: the surfaces to be painted must be dry and clean of dust, efflorescence, rust, grease, wax, etc. and properly printed. New surfaces Masonry: If you wish to give a first coat to use as a primer, thin the paint with approximately 10-15% water. Dead or dusty plaster: prime with Brufix Fixing Preparation or Universal Fixer. Iron / Steel: prime with Brumin Antirust Preparation. Wood: prime with Sellatine Wood Preparation or Acrylic Bruguer Universal Preparation. Finish: apply one or two coats of Expert. Respect the drying time between coats. Painted surfaces: If the old paint is in good condition, clean and apply one or two coats of Expert Matte. If the old paint is in poor condition, it must be removed and proceed as on a new surface. If the old paint is glue, tempera or lime it must be removed or at least primed with Brufix Fixing Preparation until a firm support is achieved. For painting other materials or specific situations not contemplated in this Technical Data Sheet, Observations: On very porous surfaces the first layer can be diluted up to 20-30%. Surfaces affected by tobacco smoke or stains caused by water leaks or infiltrations must be primed with Sellatine Wood Preparation to prevent subsequent bleeding.

Temperatur vid drift

5 - 35 ° C