SLIM-DUAL dual motion detector - without a bracket. A bracket is available for purchase at one of our auctions. The SLIM-DUAL-LUNA-PET detector detects motion in the protected area. Additionally, the detector has a set of LEDs that perform a lighting function. It is certified for compliance with EN 50131 Grade 2 requirements; motion detection using two sensors: a passive infrared sensor (PIR) and a microwave sensor (MW); adjustable detection sensitivity of both sensors; ability to test sensors separately; digital motion detection algorithm; digital temperature compensation; digital filter of signals received by the microwave sensor ensures immunity to interference caused by the power grid and discharge lamps; selectable operating mode: basic, advanced, PIR or MW; wide-angle lens designed specifically for SLIM LINE detectors; immunity to pets weighing up to 20 kilograms (basic operating mode only); ability to configure detector operating parameters using the OPT-1 remote control; built-in EOL resistors (2EOL: 2 x 1.1 k / 2 x 4.7 k / 2 x 5.6 k); lighting function implemented using white LEDs; ability to remotely control the lighting or activate the lighting by motion; LED indicator for signalling; selection of LED indicator color (7 colors available); remotely turning the LED indicator on/off; remote switching between two sets of detector operating parameters; remotely turning on/off configuration mode; supervision of the motion detection system and supply voltage; tamper protection against opening the housing and tearing it off the surface; Technical data: Supply voltage: (15%)12 V DC. Detectable movement speed: 0.3..3 m/s. Operating temperature range: -10°C..+55°C. Recommended mounting height: 2.4 m. Standby current consumption: 14 mA. Maximum current consumption: 100 mA. Weight: 144 g. Maximum humidity: 93.3%. Dimensions 62 x 137 x 42 mm. Environmental class according to EN50130-5: II. Alarm signalling time: 2 s. Standards complied with: EN 50131-1, EN 50131-2-4, EN 50130-4, EN 50130-5. Microwave frequency: 24.125 GHz. Security level according to EN50131-2-4: Grade 2. EOL resistors: 2 x 1.1 kOhm / 2 x 4.7 kOhm / 2 x 5.6 kOhm. Warm-up time: 30 s. Detection area: 12 mx 13 m, 90°. Alarm outputs: (NC relay, resistive load) 40 mA / 24 V DC. Tamper outputs: (NC relay, resistive load) 40 mA / 24 V DC.