Proven Polish brand

Dear Customers, our products are colored individually, according to your order, so we ask for thoughtful purchases!

_________________________________________________

Manufacturer: NIKKI

Capacity: 1L

Type: Anti-corrosion radiator paint

Coverage: up to 12.5 m² with one coat

Application: spray, roller, brush

Recommended number of layers: 2 layers

Gloss level: Semi-matte

Color: Yellow Gold RAL1004

_________________________________________________

* To get to know the color in real life, you can order 4 color samples and test the color and coverage.

WARNING The color visible on your monitor may differ significantly from the actual color due to color reproduction technology, individual monitor settings on your side, and differences in lighting. Therefore, we recommend ordering a sample that reflects the actual color.

By ordering the product without ordering a sample first, you risk receiving a shade that will not fully meet your expectations.

_________________________________________________

Other colors from the palette are available in another auction.

UNIQUE FEATURES:

Flexible and very well adherent – creates a durable, crack-resistant and peel-resistant coating;

For direct application on rust – converts and protects corrosion spots;

Resistant to UV radiation – can also be used on elements exposed to light;

Very high resistance to scratches and mechanical damage;

Highly resistant to dirt – coating easy to keep clean;

Increased anti-corrosion protection – protects metal from further rusting.

_______________________________________________

APPLICATION:

Panel radiators (with grilles and side panels);

Cast iron radiators;

Aluminum finned radiators;

Tube radiators, including so-called 'ladder' bathroom radiators;

Pipes of heating risers and connections to radiators.

Can be used: indoors, on surfaces, as a protective and finishing layer

_________________________________________________

ABOUT THE PRODUCT:

Radiator paint is a water-based, covering anti-corrosion paint for metal, intended for painting directly on rust, without the need for a separate primer. It creates a durable, protective coating, improving appearance and protecting metal surfaces from corrosion.

Especially recommended for radiators – resistant to elevated temperatures (short-term up to approx. 70°C, long-term up to approx. 50°C). After drying, the coating is flexible, does not soften under the influence of heat and maintains very high mechanical resistance.

_________________________________________________

In this auction you buy 1L !

_________________________________________________

For the safety of your shipments, all parcel orders are fulfilled in metal cans and in sturdy rigid cardboard.

_______________________________________________

SURFACE PREPARATION:

⇨ The substrate must be dry, clean, load-bearing, free from dust, grease, dirt, anti-adhesive agents, tar and other contaminants;

⇨ For smooth surfaces, it is recommended to matte with sandpaper to improve adhesion;

⇨ In the case of powder-coated radiators (most ladder, panel, aluminum) – matting is necessary;

⇨ Rusty areas should be mechanically cleaned of loose parts; in hard-to-reach crevices, a rust converter type preparation can be additionally used.

DRYING TIME:

- On metal substrates, the paint is dry to the touch after 1 hour (at approx. 20°C and 60% humidity);

- Drying time depends on temperature, humidity, type of substrate and layer thickness;

- Partial hardening: after approx. 12 hours;

- Full hardening: after approx. 48 hours.

_______________________________________________

METHOD OF USE:

• Clean the substrate, degrease and leave to dry;
• Radiators should be disconnected from the heat source during painting (valves turned off);
• Heating risers are best painted outside the heating season;
• Old coatings – remove loose fragments, rust deposits, organic dirt, degrease;
• The paint can be applied:

  - with a brush, roller, air or hydrodynamic spray

  _________________________________________________

TECHNICAL DATA:

* Specific gravity: approx. 1.05 kg/l;

* Recommended application temperature: +8°C to +30°C;

* Applying the next layer: after 0.5–1 hour, when the coating is dust-dry;

* Available different gloss levels: high gloss, satin, semi-matte, matte.

_________________________________________________